![]() |
| | #1 (permalink) |
| I have a Toshiba laptop that is connected to a wireless network in my home. My concern is security for this computer. I have been reading alot of articles on the internet concerning security, and most suggest several things, one being encryption, The others are enabeling static ip address and wireless mac address filtering. I contacted Verizon and asked them to help me secure this connection to my laptop and they enabled WEP and assigned a key. I then asked about the other two options mentioned above and they said all i needed was WEP enabled. Finally my question: Is that enough? I would appreciate some advice before calling Verizon back. Thank you | Guest
Posts: n/a
|
|
| | #2 (permalink) | |
| Hi Bill, The most secure way of connecting to the Internet is via a wired connection (usually, but not always, Ethernet). For people who connect via this method, it is important that the wireless function is disabled. However, for some people this is not convenient and so they use wireless instead. It is important that if you use wireless that you have an encrypted connection. There are a number of different encryption methods that are in common useage. These are, from the oldest standard to the newest, WEP (Wired Equivalent Privacy), WPA (Wi-Fi Protected Access) and WPA2. WPA2 is an upto date version of WPA and, if your equipment supports this protocol, is the recommended method of securing your connection. Of course, if your equipment only supports WEP then you should still enable and use it as WEP is better than no security at all. However, beginning in 2001, several serious weaknesses were identified by cryptanalysts with the result that today a WEP connection can be cracked with readily available software within minutes. I suggest that you download the user manual for your router and if you can set up your system to use the WPA2 protocol or highest protocol that your equipment supports. Please note that you might have to have a direct wired connection to your router whilst you do this - refer to the manual for full instructions. Dwarf "Bill T." wrote: Quote:
| Guest
Posts: n/a
| |
|
| | #3 (permalink) | |
| WEP is not safe at all. It is easily cracked. You should use WPA2 or at least WPA. If they do not support this on the router that they supplied you with, ask them to swap it for a newer model that supports the kind of security that you need. On Sat, 12 Jan 2008 09:21:03 -0800, Bill T. <ace66@discussions.microsoft.com> wrote: Quote:
Barb Bowman MS Windows-MVP http://www.microsoft.com/windowsxp/e...ts/bowman.mspx http://blogs.digitalmediaphile.com/barb/ | Guest
Posts: n/a
| |
|
| | #4 (permalink) | ||
| Thats funny, i just got off the phone with verizon and they said they only have modems with WEP, nothing with WPA or better. Can you beleive that? Then they said WEP is good security! This is my ISP telling me this! I guess i will just have to go get a new one myself. Thanks anyway, Bill "Barb Bowman" wrote: Quote:
| Guest
Posts: n/a
| ||
|
| | #5 (permalink) | ||
| Hi Dwarf, Maybe you can help me. I have wireless network and can access anywhere in the house with my Dell laptop. My brother is visiting from USA (also has a Dell laptop) and needs to do some work. I gave him what I have printed out as my network key but it keeps telling him incorrect security code. I setup my laptop and can only assume the network key on the printout is the one I used so cannot understand this problem. I cannot seem to find a way of confirming what network key number I entered on my laptop in order to wirelessly connect to the internet via my router. Can you or anyone else help please? -- 99 "Dwarf" wrote: Quote:
| Guest
Posts: n/a
| ||
|
| | #6 (permalink) | |||
| Anyone out there able to help me? Thanks. -- 99 "99" wrote: Quote:
| Guest
Posts: n/a
| |||
|
| | #7 (permalink) | |||
| Hi 99, First of all, you should have started a new thread with your query. That said, you need to set up your brother's laptop by using the same method that you initially used to set up yours. Are they identical? Do they both use the same make of wireless receiver? If you have MAC filtering enabled on your router, then temporarily turn it off. If your brother is now able to connect and you want MAC filtering enabled, then you will need to add your brother's MAC address to the permitted list in the router. Note that initial setup might need to be made over a wired connection Dwarf "99" wrote: Quote:
| Guest
Posts: n/a
| |||
|
| | #8 (permalink) | |
| Log into the router and check the passphrase there. On Sun, 13 Jan 2008 02:43:01 -0800, 99 <99@discussions.microsoft.com> wrote: Quote:
Barb Bowman MS Windows-MVP http://www.microsoft.com/windowsxp/e...ts/bowman.mspx http://blogs.digitalmediaphile.com/barb/ | Guest
Posts: n/a
| |
|
![]() |
| Tags |
| None |
| Thread Tools | |
| Display Modes | |
| |
| ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Wireless Security HELP! | Tonya | Windows Vista Networking & Sharing | 1 | 06-01-2007 04:48 PM |
| Wireless Network Security LEAP | Dan | Windows Vista Networking & Sharing | 0 | 07-06-2006 10:03 PM |
| wireless connection problem after unplug the network cable from wireless router | John Davis | Windows XP Network & Web | 0 | 08-14-2003 03:35 AM |
| URGENT: Loss of wireless connection when hitting another wireless network | Barb Bowman [MVP-Windows] | Windows XP Network & Web | 7 | 08-10-2003 09:20 PM |
| wireless network and security | Brian Blinderman | Windows XP Network & Web | 3 | 07-08-2003 12:58 PM |