XP doesnt see or recognise hard drive

Posted: 08-08-2003, 07:25 AM
I recently installed a 40 gig Maxtor hd to upgrade from my previous 20
gig also Maxtor hard drive.

My computer has a Abit KT7 Raid motherboard, although I dont have Raid
installed, just the 2 drives. They are on 2 distinct and independent
channels, both configured as Master. There is no problem with haveing 2
master disks on 2 distinct channels because when I boot up from a Win 98 se
setup disk, FDISK can see them both. (In case you are wondering, it didnt
before until I switched the boot disk select fom the BIOS)

However, when running under XP, XP cant see the 2nd disk. The 2nd disk is
the old Maxtor 20 gig hd. I went to Control Panel, Administrative Tools,
Comptuer Management, Disk Management, and still cant see it.

I tried various techniques and method but nothing helps. Any ideas or
suggestions will be greatly appreciated.

TIA.




Reply With Quote

Responses to "XP doesnt see or recognise hard drive"

Guest
Posts: n/a
 
XP doesnt see or recognise hard drive
Posted: 08-08-2003, 09:39 AM
The Hard Drive maybe locked out, as in it only maybe seen
by one operating system. Im not totally sure of your
situation, but if it shows in the Windows XP setup, then
it should be there, if not it has been locked out. There
are several ways to import it, but im not sure how to do
this in XP yet. If that is not it, it also maybe that
your motherboard does not support a hard drive on the
second channel (i find very unlikely with you Motherboard
but it may be true). So try using it as a slave on the
master channel, and if there is a divice there, remove it
and just plug in that hard drive there.
>-----Original Message-----
> I recently installed a 40 gig Maxtor hd to upgrade
from my previous 20
>gig also Maxtor hard drive.
>
> My computer has a Abit KT7 Raid motherboard,
although I dont have Raid
>installed, just the 2 drives. They are on 2 distinct and
independent
>channels, both configured as Master. There is no problem
with haveing 2
>master disks on 2 distinct channels because when I boot
up from a Win 98 se
>setup disk, FDISK can see them both. (In case you are
wondering, it didnt
>before until I switched the boot disk select fom the
BIOS)
>
> However, when running under XP, XP cant see the 2nd
disk. The 2nd disk is
>the old Maxtor 20 gig hd. I went to Control Panel,
Administrative Tools,
>Comptuer Management, Disk Management, and still cant see
it.
>
> I tried various techniques and method but nothing
helps. Any ideas or
>suggestions will be greatly appreciated.
>
> TIA.
>
>
>
>
>.
>
Reply With Quote
Thomas Wendell
Guest
Posts: n/a
 
Re: XP doesnt see or recognise hard drive
Posted: 08-08-2003, 11:08 AM
I've read here that you can't have more than one active partition on your
computer. In that case, at least PartitionMagic can help you, as XP itself
cannot.

--
=================================================
Most learned here on nntp://news.mircosoft.com
Helsinki, Finland (remove _SPAM)
=================================================




<air12ick@juno.com> kirjoitti viestissä
news:020b01c35d88$a54fed40$a001280a@phx.gbl...
> The Hard Drive maybe locked out, as in it only maybe seen
> by one operating system. Im not totally sure of your
> situation, but if it shows in the Windows XP setup, then
> it should be there, if not it has been locked out. There
> are several ways to import it, but im not sure how to do
> this in XP yet. If that is not it, it also maybe that
> your motherboard does not support a hard drive on the
> second channel (i find very unlikely with you Motherboard
> but it may be true). So try using it as a slave on the
> master channel, and if there is a divice there, remove it
> and just plug in that hard drive there.
>
> >-----Original Message-----
> > I recently installed a 40 gig Maxtor hd to upgrade
> from my previous 20
> >gig also Maxtor hard drive.
> >
> > My computer has a Abit KT7 Raid motherboard,
> although I dont have Raid
> >installed, just the 2 drives. They are on 2 distinct and
> independent
> >channels, both configured as Master. There is no problem
> with haveing 2
> >master disks on 2 distinct channels because when I boot
> up from a Win 98 se
> >setup disk, FDISK can see them both. (In case you are
> wondering, it didnt
> >before until I switched the boot disk select fom the
> BIOS)
> >
> > However, when running under XP, XP cant see the 2nd
> disk. The 2nd disk is
> >the old Maxtor 20 gig hd. I went to Control Panel,
> Administrative Tools,
> >Comptuer Management, Disk Management, and still cant see
> it.
> >
> > I tried various techniques and method but nothing
> helps. Any ideas or
> >suggestions will be greatly appreciated.
> >
> > TIA.
> >
> >
> >
> >
> >.
> >

Reply With Quote
 
LinkBack Thread Tools Display Modes
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Vista doesnt recognise Xbox 360 Controller Annie R J Brion Windows Vista Games 2 06-27-2007 02:24 PM
mapping doesnt show the drive jim sturtz Windows XP Configuration & Management 2 11-15-2004 02:40 PM
XP does not recognise all space on new hard-drive Philip Harries Windows XP Device Drivers 1 12-25-2003 02:22 AM
windows xp will not recognise cdrw blank disc in drive. noel Windows XP Music 2 09-30-2003 11:23 PM
CDRW/DVD Drive can't recognise any disk Kay Windows XP New Users 0 07-27-2003 08:28 PM


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90