> Hi,
>
> I am new to xp embedded. I have experiance with WinCE. Is the build
> procedure as well as image loading is comparable between WinCE and xp
> embedded.
>
> I installed the trial version of embedded xp and wants to build some
> sample
> image. Is it possible to make sample image without hardware. Where can get
> some tutorials for this.
>
> Thanks,
> San
>
> Dear san,
>
> Tutorial for beginners.
> This tutorial describes several parts of building and deploying an
> image.
> Tutorial: Building and Deploying a Run-Time Image
> http://msdn2.microsoft.com/en-us/library/ms940811.aspx
>
> You are able to use Vitual PC to test XPE without real hardware.
> How to Demonstrate Windows XP Embedded using Virtual PC
> http://msdn2.microsoft.com/en-us/library/aa460095.aspx
>
>
>
> --
> Best Regards,
> Bing Chen
> Advantech Co., Ltd.
> Microsoft eMVP
>
> 竅瓊繕 - 繚L糧n瞼xW簞織O瞻J礎癒禮@繚~穡t簡繡g職P簞
> http://www.advantech.com.tw/epc/newsletter/ATW/2005MS/
>
>
> "san" <san@discussions.microsoft.com> 翹繞翹g穢籀繞l瞼籀繚s罈D:05076BB9-CF59-4997-8D6F-39A1367CC4AD@microsoft.com...> > Hi,>
> >
> > I am new to xp embedded. I have experiance with WinCE. Is the build
> > procedure as well as image loading is comparable between WinCE and xp
> > embedded.
> >
> > I installed the trial version of embedded xp and wants to build some
> > sample
> > image. Is it possible to make sample image without hardware. Where can get
> > some tutorials for this.
> >
> > Thanks,
> > San
> >
>
>
> Dear Bing Chen,
>
> Thanks for the great information. I will go through the tutorial and I
> have
> a small question.
>
> To build the image we need the real hardware and otherwise it can be done
> through virtual PC. Where can I find the Virtual PC Console?
>
> Thanks,
> San
>
>
> "Bing.Chen" wrote:
>>> Dear san,
>>
>> Tutorial for beginners.
>> This tutorial describes several parts of building and deploying an
>> image.
>> Tutorial: Building and Deploying a Run-Time Image
>> http://msdn2.microsoft.com/en-us/library/ms940811.aspx
>>
>> You are able to use Vitual PC to test XPE without real hardware.
>> How to Demonstrate Windows XP Embedded using Virtual PC
>> http://msdn2.microsoft.com/en-us/library/aa460095.aspx
>>
>>
>>
>> --
>> Best Regards,
>> Bing Chen
>> Advantech Co., Ltd.
>> Microsoft eMVP
>>
>> 研華 - 微軟台灣區嵌入式作業系統經銷商
>> http://www.advantech.com.tw/epc/newsletter/ATW/2005MS/
>>
>>
>> "san" <san@discussions.microsoft.com>
>> 撰寫於郵件新聞:05076BB9-CF59-4997-8D6F-39A1367CC4AD@microsoft.com...>> > Hi,>>
>> >
>> > I am new to xp embedded. I have experiance with WinCE. Is the build
>> > procedure as well as image loading is comparable between WinCE and xp
>> > embedded.
>> >
>> > I installed the trial version of embedded xp and wants to build some
>> > sample
>> > image. Is it possible to make sample image without hardware. Where can
>> > get
>> > some tutorials for this.
>> >
>> > Thanks,
>> > San
>> >
>>
>>
>
> There are also books on XPe that can help you get up the learning curve -
> http://www.seanliming.com/books.html
>
> Virtual PC 2007 can be downloaded from here:
> http://www.microsoft.com/windows/dow...c/default.mspx
>
> --
> Regards,
>
> Sean Liming
> www.sjjmicro.com / www.seanliming.com
> Book Author - XP Embedded Advanced, XP Embedded Supplemental Toolkit
>
>
> "san" <san@discussions.microsoft.com> wrote in message
> news:32A15DF4-1EBA-43BE-84AC-2AEBEDCF8BF7@microsoft.com...> > Dear Bing Chen,>
> >
> > Thanks for the great information. I will go through the tutorial and I
> > have
> > a small question.
> >
> > To build the image we need the real hardware and otherwise it can be done
> > through virtual PC. Where can I find the Virtual PC Console?
> >
> > Thanks,
> > San
> >
> >
> > "Bing.Chen" wrote:
> >> >> Dear san,
> >>
> >> Tutorial for beginners.
> >> This tutorial describes several parts of building and deploying an
> >> image.
> >> Tutorial: Building and Deploying a Run-Time Image
> >> http://msdn2.microsoft.com/en-us/library/ms940811.aspx
> >>
> >> You are able to use Vitual PC to test XPE without real hardware.
> >> How to Demonstrate Windows XP Embedded using Virtual PC
> >> http://msdn2.microsoft.com/en-us/library/aa460095.aspx
> >>
> >>
> >>
> >> --
> >> Best Regards,
> >> Bing Chen
> >> Advantech Co., Ltd.
> >> Microsoft eMVP
> >>
> >> 竅瓊繕 - 繚L糧n瞼xW簞織O瞻J礎癒禮@繚~穡t簡繡g職P簞
> >> http://www.advantech.com.tw/epc/newsletter/ATW/2005MS/
> >>
> >>
> >> "san" <san@discussions.microsoft.com>
> >> 翹繞翹g穢籀繞l瞼籀繚s罈D:05076BB9-CF59-4997-8D6F-39A1367CC4AD@microsoft.com...
> >> > Hi,
> >> >
> >> > I am new to xp embedded. I have experiance with WinCE. Is the build
> >> > procedure as well as image loading is comparable between WinCE and xp
> >> > embedded.
> >> >
> >> > I installed the trial version of embedded xp and wants to build some
> >> > sample
> >> > image. Is it possible to make sample image without hardware. Where can
> >> > get
> >> > some tutorials for this.
> >> >
> >> > Thanks,
> >> > San
> >> >
> >>
> >>
> >>
>
>
> Thanks for your reply. Now I have a general question:
>
> After building the image we have to copy the image files to the targetted
> device and has to boot the board .
>
> But suppose I have a hardware/board to deploy the image, how can I copy
> the
> image to the board. Is it like, PC will be having two hard disk and in
> the
> second hard disk we will copy the image and will connect the board instead
> of
> PC's motherboard and will boot the image? I am confused in this part?
> (sorry
> if I am asking some stupid question)
>
> -San
>
> "Sean Liming (eMVP)" wrote:
>>>
>> There are also books on XPe that can help you get up the learning curve -
>> http://www.seanliming.com/books.html
>>
>> Virtual PC 2007 can be downloaded from here:
>> http://www.microsoft.com/windows/dow...c/default.mspx
>>
>> --
>> Regards,
>>
>> Sean Liming
>> www.sjjmicro.com / www.seanliming.com
>> Book Author - XP Embedded Advanced, XP Embedded Supplemental Toolkit
>>
>>
>> "san" <san@discussions.microsoft.com> wrote in message
>> news:32A15DF4-1EBA-43BE-84AC-2AEBEDCF8BF7@microsoft.com...>> > Dear Bing Chen,>>
>> >
>> > Thanks for the great information. I will go through the tutorial and I
>> > have
>> > a small question.
>> >
>> > To build the image we need the real hardware and otherwise it can be
>> > done
>> > through virtual PC. Where can I find the Virtual PC Console?
>> >
>> > Thanks,
>> > San
>> >
>> >
>> > "Bing.Chen" wrote:
>> >
>> >> Dear san,
>> >>
>> >> Tutorial for beginners.
>> >> This tutorial describes several parts of building and deploying an
>> >> image.
>> >> Tutorial: Building and Deploying a Run-Time Image
>> >> http://msdn2.microsoft.com/en-us/library/ms940811.aspx
>> >>
>> >> You are able to use Vitual PC to test XPE without real hardware.
>> >> How to Demonstrate Windows XP Embedded using Virtual PC
>> >> http://msdn2.microsoft.com/en-us/library/aa460095.aspx
>> >>
>> >>
>> >>
>> >> --
>> >> Best Regards,
>> >> Bing Chen
>> >> Advantech Co., Ltd.
>> >> Microsoft eMVP
>> >>
>> >> ?aμO - ·L3n¥xAW°I’O?J|!§@·~‥t2I﹐g?P°O
>> >> http://www.advantech.com.tw/epc/newsletter/ATW/2005MS/
>> >>
>> >>
>> >> "san" <san@discussions.microsoft.com>
>> >> ???gco?l¥o·s?D:05076BB9-CF59-4997-8D6F-39A1367CC4AD@microsoft.com...
>> >> > Hi,
>> >> >
>> >> > I am new to xp embedded. I have experiance with WinCE. Is the build
>> >> > procedure as well as image loading is comparable between WinCE and
>> >> > xp
>> >> > embedded.
>> >> >
>> >> > I installed the trial version of embedded xp and wants to build some
>> >> > sample
>> >> > image. Is it possible to make sample image without hardware. Where
>> >> > can
>> >> > get
>> >> > some tutorials for this.
>> >> >
>> >> > Thanks,
>> >> > San
>> >> >
>> >>
>> >>
>> >>
>>
>>
> Dear San,
>
> You just need to change storage devices, HD or CF.
>
> Everyone has his own solution.
>
> In my side, I set one machine to "Transfer image files to a Disk",
> "Backup XPE System" and "Keep Ghost files".
>
> To run FBA, I use follow steps.
> 1. Connect a HD to this system.
> 2. Boot into XP
> 3. Copy files into this HD.
> 4. Shutdown
> 5. Connect this HD to a target platform and run FBA.
>
>
> --
> Best Regards,
> Bing Chen
> Advantech Co., Ltd.
> Microsoft eMVP
>
> 竅瓊繕 - 繚L糧n瞼xW簞織O瞻J礎癒禮@繚~穡t簡繡g職P簞
> http://www.advantech.com.tw/epc/newsletter/ATW/2005MS/
>
>
> "san" <san@discussions.microsoft.com> 翹繞翹g穢籀繞l瞼籀繚s罈D:55512E05-A370-400D-9F4F-845724C8CC00@microsoft.com...> > Thanks for your reply. Now I have a general question:>
> >
> > After building the image we have to copy the image files to the targetted
> > device and has to boot the board .
> >
> > But suppose I have a hardware/board to deploy the image, how can I copy
> > the
> > image to the board. Is it like, PC will be having two hard disk and in
> > the
> > second hard disk we will copy the image and will connect the board instead
> > of
> > PC's motherboard and will boot the image? I am confused in this part?
> > (sorry
> > if I am asking some stupid question)
> >
> > -San
> >
> > "Sean Liming (eMVP)" wrote:
> >> >>
> >> There are also books on XPe that can help you get up the learning curve -
> >> http://www.seanliming.com/books.html
> >>
> >> Virtual PC 2007 can be downloaded from here:
> >> http://www.microsoft.com/windows/dow...c/default.mspx
> >>
> >> --
> >> Regards,
> >>
> >> Sean Liming
> >> www.sjjmicro.com / www.seanliming.com
> >> Book Author - XP Embedded Advanced, XP Embedded Supplemental Toolkit
> >>
> >>
> >> "san" <san@discussions.microsoft.com> wrote in message
> >> news:32A15DF4-1EBA-43BE-84AC-2AEBEDCF8BF7@microsoft.com...
> >> > Dear Bing Chen,
> >> >
> >> > Thanks for the great information. I will go through the tutorial and I
> >> > have
> >> > a small question.
> >> >
> >> > To build the image we need the real hardware and otherwise it can be
> >> > done
> >> > through virtual PC. Where can I find the Virtual PC Console?
> >> >
> >> > Thanks,
> >> > San
> >> >
> >> >
> >> > "Bing.Chen" wrote:
> >> >
> >> >> Dear san,
> >> >>
> >> >> Tutorial for beginners.
> >> >> This tutorial describes several parts of building and deploying an
> >> >> image.
> >> >> Tutorial: Building and Deploying a Run-Time Image
> >> >> http://msdn2.microsoft.com/en-us/library/ms940811.aspx
> >> >>
> >> >> You are able to use Vitual PC to test XPE without real hardware.
> >> >> How to Demonstrate Windows XP Embedded using Virtual PC
> >> >> http://msdn2.microsoft.com/en-us/library/aa460095.aspx
> >> >>
> >> >>
> >> >>
> >> >> --
> >> >> Best Regards,
> >> >> Bing Chen
> >> >> Advantech Co., Ltd.
> >> >> Microsoft eMVP
> >> >>
> >> >> ?a瞿gO - 癒PL3n瞽DxAW瞽XI癒礎O?J|!癒簣@癒P~癒Lt2I癒Mg?P瞽XO
> >> >> http://www.advantech.com.tw/epc/newsletter/ATW/2005MS/
> >> >>
> >> >>
> >> >> "san" <san@discussions.microsoft.com>
> >> >> ???gco?l瞽Do癒Ps?D:05076BB9-CF59-4997-8D6F-39A1367CC4AD@microsoft.com...
> >> >> > Hi,
> >> >> >
> >> >> > I am new to xp embedded. I have experiance with WinCE. Is the build
> >> >> > procedure as well as image loading is comparable between WinCE and
> >> >> > xp
> >> >> > embedded.
> >> >> >
> >> >> > I installed the trial version of embedded xp and wants to build some
> >> >> > sample
> >> >> > image. Is it possible to make sample image without hardware. Where
> >> >> > can
> >> >> > get
> >> >> > some tutorials for this.
> >> >> >
> >> >> > Thanks,
> >> >> > San
> >> >> >
> >> >>
> >> >>
> >> >>
> >>
> >>
> >>
>
>
> Bing chen,
>
> Thanks for the detals.
>
> I buld the image and tried to deploy it in a secondary hard disk by
> following the steps mentioned in MSDN. Build completed successfully and
> booting from that image is restarting the machine continuously.
>
> While booting I selected XP embedded and FBA started and showed installing
> the components. Then system restarting again. I am not able to fix this
> problem. I tried this in a different machine also but the behaviour was
> same.
>
> Please let me know your sugestions regarding this.
>
> Thanks,
> San
>
> "Bing.Chen" wrote:
>>> Dear San,
>>
>> You just need to change storage devices, HD or CF.
>>
>> Everyone has his own solution.
>>
>> In my side, I set one machine to "Transfer image files to a Disk",
>> "Backup XPE System" and "Keep Ghost files".
>>
>> To run FBA, I use follow steps.
>> 1. Connect a HD to this system.
>> 2. Boot into XP
>> 3. Copy files into this HD.
>> 4. Shutdown
>> 5. Connect this HD to a target platform and run FBA.
>>
>>
>> --
>> Best Regards,
>> Bing Chen
>> Advantech Co., Ltd.
>> Microsoft eMVP
>>
>> ?aμO - ·L3n¥xAW°I’O?J|!§@·~‥t2I﹐g?P°O
>> http://www.advantech.com.tw/epc/newsletter/ATW/2005MS/
>>
>>
>> "san" <san@discussions.microsoft.com> ???gco?l¥o·s?D:55512E05-A370-400D-9F4F-845724C8CC00@microsoft.com...
>>>> > Thanks for your reply. Now I have a general question:>>
>> >
>> > After building the image we have to copy the image files to the
>> > targetted
>> > device and has to boot the board .
>> >
>> > But suppose I have a hardware/board to deploy the image, how can I copy
>> > the
>> > image to the board. Is it like, PC will be having two hard disk and in
>> > the
>> > second hard disk we will copy the image and will connect the board
>> > instead
>> > of
>> > PC's motherboard and will boot the image? I am confused in this part?
>> > (sorry
>> > if I am asking some stupid question)
>> >
>> > -San
>> >
>> > "Sean Liming (eMVP)" wrote:
>> >
>> >>
>> >> There are also books on XPe that can help you get up the learning
>> >> curve -
>> >> http://www.seanliming.com/books.html
>> >>
>> >> Virtual PC 2007 can be downloaded from here:
>> >> http://www.microsoft.com/windows/dow...c/default.mspx
>> >>
>> >> --
>> >> Regards,
>> >>
>> >> Sean Liming
>> >> www.sjjmicro.com / www.seanliming.com
>> >> Book Author - XP Embedded Advanced, XP Embedded Supplemental Toolkit
>> >>
>> >>
>> >> "san" <san@discussions.microsoft.com> wrote in message
>> >> news:32A15DF4-1EBA-43BE-84AC-2AEBEDCF8BF7@microsoft.com...
>> >> > Dear Bing Chen,
>> >> >
>> >> > Thanks for the great information. I will go through the tutorial and
>> >> > I
>> >> > have
>> >> > a small question.
>> >> >
>> >> > To build the image we need the real hardware and otherwise it can be
>> >> > done
>> >> > through virtual PC. Where can I find the Virtual PC Console?
>> >> >
>> >> > Thanks,
>> >> > San
>> >> >
>> >> >
>> >> > "Bing.Chen" wrote:
>> >> >
>> >> >> Dear san,
>> >> >>
>> >> >> Tutorial for beginners.
>> >> >> This tutorial describes several parts of building and deploying
>> >> >> an
>> >> >> image.
>> >> >> Tutorial: Building and Deploying a Run-Time Image
>> >> >> http://msdn2.microsoft.com/en-us/library/ms940811.aspx
>> >> >>
>> >> >> You are able to use Vitual PC to test XPE without real
>> >> >> hardware.
>> >> >> How to Demonstrate Windows XP Embedded using Virtual PC
>> >> >> http://msdn2.microsoft.com/en-us/library/aa460095.aspx
>> >> >>
>> >> >>
>> >> >>
>> >> >> --
>> >> >> Best Regards,
>> >> >> Bing Chen
>> >> >> Advantech Co., Ltd.
>> >> >> Microsoft eMVP
>> >> >>
>> >> >> ?a£gO - !PL3n¢DxAW¢XI!|O?J|!!±@!P~!Lt2I!Mg?P¢XO
>> >> >> http://www.advantech.com.tw/epc/newsletter/ATW/2005MS/
>> >> >>
>> >> >>
>> >> >> "san" <san@discussions.microsoft.com>
>> >> >> ???gco?l¢Do!Ps?D:05076BB9-CF59-4997-8D6F-39A1367CC4AD@microsoft.com...
>> >> >> > Hi,
>> >> >> >
>> >> >> > I am new to xp embedded. I have experiance with WinCE. Is the
>> >> >> > build
>> >> >> > procedure as well as image loading is comparable between WinCE
>> >> >> > and
>> >> >> > xp
>> >> >> > embedded.
>> >> >> >
>> >> >> > I installed the trial version of embedded xp and wants to build
>> >> >> > some
>> >> >> > sample
>> >> >> > image. Is it possible to make sample image without hardware.
>> >> >> > Where
>> >> >> > can
>> >> >> > get
>> >> >> > some tutorials for this.
>> >> >> >
>> >> >> > Thanks,
>> >> >> > San
>> >> >> >
>> >> >>
>> >> >>
>> >> >>
>> >>
>> >>
>> >>
>>
>>
| | LinkBack | Thread Tools | Display Modes |
 |
| Thread Tools | |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| How to deploy my application in XP Embedded | Locus | Windows XP Embedded | 4 | 04-11-2006 03:28 AM |
| Problem with deploy XPE image on CF card | Tingjun | Windows XP Embedded | 3 | 02-06-2006 08:43 AM |
| Deploy a image... | John Smith | Windows XP Embedded | 3 | 10-04-2005 04:31 PM |
| deploy created run-time windows Embedded image on to the new machi | embedded_msit | Windows XP Embedded | 6 | 04-05-2005 08:22 AM |
| Using DUA to deploy QFE's on embedded device | joseph.zazza.b@bayer.com | Windows XP Embedded | 0 | 12-11-2004 12:43 AM |
Linear Mode
Posts: n/a