XP Vista Network Problem

> It must be TCP/IP. More and other protocol will bring more issues. Assuming you receive network path not found error, this post may help,
>
> Vista: The Network Path was not found
> http://www.chicagotech.net/forum1.htm
>
> Bob Lin, MS-MVP, MCSE & CNE
> Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
> How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
> "This_Is_Brian" <This_Is_Brian@discussions.microsoft.com> wrote in message news:119AAB07-7147-4C68-AF6C-D7D63416D9FC@microsoft.com...
> I tried everything I can think of but still cannot successfully network Vista
> to Vista or XP.
> I have 4 computers networked by a wired hub (switch). 2 computers are Vista
> Ultimate and 2 are XP Pro. Only my main PC (this one) has Norton Internet
> Security and the others have nothing, and I even shut off the firewall on the
> others. I used NetBIOS in the past and had no problems but can't get it to
> work now. I tried all other protocols and again nothing. I can see the other
> Vista machine from this one, but it will not let me access it. I have tried
> many of the post here but still no luck. Could someone could tell me the
> exact settings and protocols?
> Also, any other advice would be helpful. Yes I've done all the turn off the
> firewall, downloaded and installed LLTD on the XP machine, etc., but still
> nothing. Getting very frustrating.
> Thanks in advance!
> Brian

> It must be TCP/IP. More and other protocol will bring more issues. Assuming you receive network path not found error, this post may help,
>
> Vista: The Network Path was not found
> http://www.chicagotech.net/forum1.htm
>
> Bob Lin, MS-MVP, MCSE & CNE
> Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
> How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
> "This_Is_Brian" <This_Is_Brian@discussions.microsoft.com> wrote in message news:119AAB07-7147-4C68-AF6C-D7D63416D9FC@microsoft.com...
> I tried everything I can think of but still cannot successfully network Vista
> to Vista or XP.
> I have 4 computers networked by a wired hub (switch). 2 computers are Vista
> Ultimate and 2 are XP Pro. Only my main PC (this one) has Norton Internet
> Security and the others have nothing, and I even shut off the firewall on the
> others. I used NetBIOS in the past and had no problems but can't get it to
> work now. I tried all other protocols and again nothing. I can see the other
> Vista machine from this one, but it will not let me access it. I have tried
> many of the post here but still no luck. Could someone could tell me the
> exact settings and protocols?
> Also, any other advice would be helpful. Yes I've done all the turn off the
> firewall, downloaded and installed LLTD on the XP machine, etc., but still
> nothing. Getting very frustrating.
> Thanks in advance!
> Brian