XPe NIC driver issue (Intel PRO/100 VE on MSC CXB-CD945 COM, FP2007)

Posted: 06-25-2007, 02:39 PM

Odd Erling N. Eriksen

Guest
Posts: n/a

Hi,

Trying to get a grip on XPe, I am dumbfounded as to how to make my NIC work.

Problem: The target system is an MSC CXB-CD945, utilizing an Intel
PRO/100VE 82562EZ-based onboard network adapter. (DeviceID: 27DC)

When importing the .cmq file generated by TAP into the FP2007 Component
Designer, it complains that no suitable driver was found, even though
the PRO/100 VE drivers are added to the Component Database by way of
Intel's XP Embedded-prepared drivers:

http://preview.tinyurl.com/2mlr64

When imported into Component Designer, however, the resulting component
refers to PRO/100 VE devices with DevID 2449.

Thus (Or, for all I know, for some different reason altogether) no
driver is installed while the FBA goes about its business, even though
the required PRO/100 VE component is added to the image in Target Designer.

So - any suggestions? Have I simply looked in the wrong place for drivers?

Are the 2449 and 27DC devices similar enough that modifying the
accompanying .inf file will do the trick? If so - what would be an
appropriate course of action to figure out what needs to be modified?

Does anyone out there actually _have_ XPe drivers for the 27DC PRO/100 VE?

Thanks,

Odd Erling, hardware geek - puzzled by software stuff.

Responses to "XPe NIC driver issue (Intel PRO/100 VE on MSC CXB-CD945 COM, FP2007)"

Sean Liming $MVP$

Guest
Posts: n/a

Re: XPe NIC driver issue (Intel PRO/100 VE on MSC CXB-CD945 COM, FP2007)

Posted: 06-25-2007, 05:48 PM

You could modify the component to support you device PnP ID, but there is no
gaurantee that the driver is going to work.

Did a Ethernet driver come with the board? If it did than you will want to
import, the INF for that driver and create an SLD.

Regards,

Sean Liming
www.sjjmicro.com / www.seanliming.com
Book Author - XP Embedded Advanced, XP Embedded Supplemental Toolkit

"Odd Erling N. Eriksen" <odderi@gmail.com> wrote in message
news:467fc569$1@proxy.mimer.no...

> Hi,
>
> Trying to get a grip on XPe, I am dumbfounded as to how to make my NIC
> work.
>
> Problem: The target system is an MSC CXB-CD945, utilizing an Intel
> PRO/100VE 82562EZ-based onboard network adapter. (DeviceID: 27DC)
>
> When importing the .cmq file generated by TAP into the FP2007 Component
> Designer, it complains that no suitable driver was found, even though
> the PRO/100 VE drivers are added to the Component Database by way of
> Intel's XP Embedded-prepared drivers:
>
> http://preview.tinyurl.com/2mlr64
>
> When imported into Component Designer, however, the resulting component
> refers to PRO/100 VE devices with DevID 2449.
>
> Thus (Or, for all I know, for some different reason altogether) no driver
> is installed while the FBA goes about its business, even though the
> required PRO/100 VE component is added to the image in Target Designer.
>
> So - any suggestions? Have I simply looked in the wrong place for drivers?
>
> Are the 2449 and 27DC devices similar enough that modifying the
> accompanying .inf file will do the trick? If so - what would be an
> appropriate course of action to figure out what needs to be modified?
>
> Does anyone out there actually _have_ XPe drivers for the 27DC PRO/100 VE?
>
> Thanks,
>
> Odd Erling, hardware geek - puzzled by software stuff.
>
>

Odd Erling N. Eriksen

Guest
Posts: n/a

Re: XPe NIC driver issue (Intel PRO/100 VE on MSC CXB-CD945 COM,FP2007)

Posted: 06-25-2007, 08:49 PM

Sean Liming (MVP) wrote:

>
> You could modify the component to support you device PnP ID, but there
> is no gaurantee that the driver is going to work.

-Been there, done that. Didn't work - at least not right off the bat.
Will do some more tinkering tomorrow.

> Did a Ethernet driver come with the board? If it did than you will want
> to import, the INF for that driver and create an SLD.

-Nope. I've also been in touch with the local distributor, they were
-ahem- less than enthusiastic when I asked for help in locating a proper
driver for the hardware they'd sold me.

I fired off an email to MSC (The manufacturer) as well - with some luck,
they'll relay it to the right person in their organization. Not a single
driver was available for download off their website.

Anyway - thanks.

--
Odd Erling - still puzzled.

LinkBack

Thread Tools

Display Modes

« Windows Updates to XPE devices | control panel>admin tools>services »

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Intel QST, Vista 64 driver issue again.	Fetterbr	Windows Vista Hardware & Devices	3	09-15-2007 11:27 AM
FP2007 - Issue - Opening PDF in Internet Explorer	KSMH	Windows XP Embedded	4	06-22-2007 02:25 PM
Network adapter (Intel PRO/100 VE) issue	K	Windows XP Embedded	4	02-20-2007 08:00 PM
Help Please w/ Intel USB Driver	Jason Allen	Windows XP Device Drivers	2	06-09-2004 09:44 PM
Intel NIC issue	Jonathan Kay [MVP]	Windows XP Messenger	2	09-13-2003 12:25 AM

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90